City of Milpitas
Engineering Design Guidelines
Street Lights

The information and guidelines contained herein are to be used whenever applicable. In the event a development is to be constructed in stages, master utility plans are required prior to submittal of the first stage improvement plans. The master utility plans shall show all improvements, including interim (phased) and ultimate improvements. For information regarding these guidelines contact the Land Development Section of the Engineering Division, at (408) 586-3329.

STREET LIGHTS

Show all lights and conduits necessary for the development including proposed service points and wattage.

Note:
PDF files requires an Adobe Acrobat Reader, which may be downloaded for free.

Design

1. For Abel Street from Montague to Weller Lane and Main Street between Montague and Railroad see Streetscape Section.

2. All other streets
   
   a. Illuminane Based Design Method, Conform to Illuminating Engineering
       Society Publication RP-8

   b. Lamp Type:
       High Pressure Sodium (HPS) with 120/240 volts, except where tying to     an existing system which is not 120 volts
              
   c. Luninare Distribution:
      Non Cut-off, Type III

   d. Spacing:
       To be determined by the design Engineer
              
   e. Lamp Size and Location:
       Per City Standard Drawing No. 441 and 202